Conservation

Attention! Remember to take care of your garden furniture at least several times during the season to keep it as clean as possible. Do not forget to clean it also before storing it for the winter!

Technorattan and Polypropylene Furniture

they can be cleaned with a regular sponge (or a soft brush) soaked in water with mild soap

after washing they must be thoroughly rinsed

technorattan furniture is an ideal solution due to its durability, however dirt and dust easily settle on it, therefore it should be cleaned regularly

for white polypropylene furniture chlorinated water can be used without concern that it will be damaged

Aluminum Garden Furniture

they do not require much maintenance, from time to time they can be refreshed by brushing and rinsing

there are many metal products that allow for additional maintenance of the furniture

Teak Garden Furniture

they should be cleaned with water and a mild detergent solution

due to the fact that this furniture requires a lot of moisture, it should be protected twice a year with a teak impregnation agent

the best way to recognize when your teak furniture requires maintenance is rain, after which water droplets should settle on the furniture, if this is not the case it is time for maintenance

Maintenance of furniture made of teak wood using the following products:

STEP 1 – Cleaner:

• Rinse the table with water.
• Shake the bottle with teak cleaner before use.
• Use a sponge to apply teak cleaner and leave for 3 minutes.
• Using a thick (rough) sponge clean the table thoroughly, following the wood grain.
• Rinse the furniture thoroughly with water.
• The thick rough sponge is included in the set together with Teak cleaner.

Attention! We recommend that before using the products below, first apply teak cleaner.

STEP 2 – Teak Protector:

• Make sure that the surface of the furniture is clean after completing step 1.
• Apply a thin layer of the product to the table.
• Leave to dry for 30 minutes.
• Apply a second layer of the product.
• Before proceeding to step 3 leave the furniture to dry again.

STEP 3 – Teak Shield:

• Shake the bottle with teak shield for at least 1 minute.
• Using a soft lint-free cloth apply a thin layer of the product.
• Leave for 4 hours.
• After this time apply a second layer of the product.
• Leave for at least 48 hours without exposing the furniture to weather conditions.

Repeat the maintenance process at least 2 times a year.